Application Guide

MaxCell® product descriptions do not directly correlate to the size of conduits. 4” 3-Cell or 3” 3-Cell are not meant specifically for 4” or 3” conduits. The description only applies to the width of the product when pressed flat. General guidelines for deciding which MaxCell to use in various applications.

 

4" 3-Cell

This product was designed for use in 4" or larger ducts. Multiple combinations of large and medium cable sizes are applicable. Since larger cable applications are anticipated, the number of cables and packs that can be placed is reduced; therefore, a smaller number of cables is available.

4 Inch 3 Cell
MIN CONDUIT ID MAX # OF PACKS MAX # OF CABLES MAX CABLE DIAMETER PER CELL REC. PULL LENGTH* MAX PULL LENGTH*
4" 2 6 1.5" 1,250' 2,000'
5" 3 9 1.5" 1,250' 2,000'
6" 4 12 1.5" 1,250' 2,000'
 

3" 3-Cell

This product was designed for use in 3" or larger ducts. Multiple combinations of large, medium and smaller cable sizes are applicable and anticipated.

3 Inch 3 Cell
MIN CONDUIT ID MAX # OF PACKS MAX # OF CABLES MAX CABLE DIAMETER PER CELL REC. PULL LENGTH* MAX PULL LENGTH*
3" 2 6 1.05" 1,250' 2,000'
4" 3 9 1.05" 1,250' 2,000'
5" 4 12 1.05" 1,250' 2,000'
6" 5 15 1.05" 1,250' 2,000'
 

2" 3-Cell

This product was designed for use in 2" ducts where three cables are being placed.

2 Inch 3 Cell
MIN CONDUIT ID MAX # OF PACKS MAX # OF CABLES MAX CABLE DIAMETER PER CELL REC. PULL LENGTH* MAX PULL LENGTH*
2" 1 3 .85" 800' 1,500'
 

2" 2-Cell

This product was designed for use in 2" ducts where two cables are being placed.

2 Inch 2 Cell
MIN CONDUIT ID MAX # OF PACKS MAX # OF CABLES MAX CABLE DIAMETER PER CELL REC. PULL LENGTH* MAX PULL LENGTH*
2" 1 2 .85" 800' 1,500'
 

2" 1-Cell

This product was designed for use in 1.5" and 2" ducts. It is designed to deploy an additional cable in a confined small conduit or innerduct.

2 Inch 1 Cell
MIN CONDUIT ID MAX # OF PACKS MAX # OF CABLES MAX CABLE DIAMETER PER CELL REC. PULL LENGTH* MAX PULL LENGTH*
1.5" + 1 1 .85" 800' 1,500'
 

MaxCell Edge

For use in 1.25" to 2" Conduits in 1, 2 and 3-Cell Configurations.

MaxCell Edge
MIN CONDUIT ID SUGGESTED PRODUCT # OF CABLES MAX CABLE DIAMETER PER CELL TYPICAL PULL LENGTH
1.10" MXE2810 1, 2, or 3 .40” 800’
1.25" MXE3212 1, 2, or 3 .45” 800’
1.50" MXE3614 1, 2, or 3 .55” 800’
1.75" MXE4418 1, 2, 3, or 4 .70” 800’
2.00" MXE5222 1, 2, 3, or 4 .85” 800’
  DOWNLOAD THIS PAGE